Show Posts

1

MX tech talk / Mushy front brake

« on: May 08, 2017, 03:36:14 PM »

Need some direction if anyone can help
New pads and fluid and the lever gets strong and grippy. Seems to get spongey after about a day and a half. I've done the zip tie to the handlebar trick and get the same results. Not sure where to go next

2

MX tech talk / Cracked sub frame ?

« on: December 18, 2016, 06:50:14 PM »

Can this be welded?

3

MX tech talk / Shell Rotella t synthetic. ?

« on: July 07, 2015, 05:22:04 PM »

Are you guy's still using this oil? Picked up a four stroke and wondering if this stuff is still being recommended.

4

MX tech talk / KTM rear axle ?

« on: January 03, 2015, 10:21:39 AM »

I want to get aftermarket rear axle blocks and oem axle is fixed to the left side block. Is there some kind of upgrade that I need? Thanks in advance

5

MX tech talk / kx 450 Oil blowback ?

« on: March 30, 2013, 02:15:17 PM »

bike is 08 kx450 cleaned the oil screen put everything back together and now oil is spitting out the breather hose at idle and will drip about a tablespoon of oil when engine is killed. pulled oil pump cover again turned kickstarter and the impeller does not turn?? ears on the impeller are not broken.... broken shaft? any answers? thanks guys!

6

Training and Fitness / good abs workout video

« on: January 28, 2013, 08:40:20 PM »

http://www.youtube.com/watch?NR=1&v=16Vp5QmprBc&feature=endscreen

7

MX tech talk / WP fork seals in KYB ?

« on: January 26, 2013, 02:47:40 PM »

is this the ticket to keep these things from leaking? thought I read awhile back.....

8

MX tech talk / early kawi 450 issues?

« on: November 26, 2012, 07:06:49 PM »

eyeballing a nice looking 2006 kawi 450 on c-list. thought i'd post up and see if there are any known issues that anyone has on this model- thanks

9

MX tech talk / (another) Gearing Question

« on: July 30, 2012, 05:16:33 PM »

i'm running a 48t rear on a 250f and I want to widen the gear ratios.... do I go down or up in teeth? thanks!

10

MX tech talk / tokyo mods

« on: March 18, 2012, 07:19:28 PM »

anyone have a phone # for their office or service dept.? couldn't find a local one on the website and i can't get through on their 888 number. ?? thanks

11

MX tech talk / bog

« on: March 08, 2012, 09:05:57 PM »

Need some help here. Bike is 07 rmz250 and has full pro circuit pipe. The bike runs fine but it just has a slight hesitation off the bottom. When I crack the throttle from idle it just goes brrrrrooohhh and it will die unless I fan the clutch. Same thing when idling. Idles fine but soon as I whip the throttle wide open it wants to die. Any ideas thanks-

12