Author Topic: rmz 250 forks on a rm250?  (Read 3722 times)

Offline Dirt Addict

  • Pro
  • *****
  • Posts: 2110
  • Fortune favors the bold...
    • View Profile
rmz 250 forks on a rm250?
« on: January 11, 2014, 10:27:16 PM »
Can anyone tell me if the forks off a 2009 rmz250 f will fit a 2006 rm250 2t ?

Offline nickvalve

  • Pro
  • *****
  • Posts: 2337
    • View Profile
Re: rmz 250 forks on a rm250?
« Reply #1 on: January 12, 2014, 08:22:01 AM »
Well they should both be 47 mm Showas so my GUESS is they would slip into the clamps / my question would be if the axle clamps have the same offset and diameters. Now if you're gonna run the entire front end / then just check the REAL overall length so your steering geometry from ride height is correct.

Offline Bruce372

  • Pro
  • *****
  • Posts: 3371
    • View Profile
Re: rmz 250 forks on a rm250?
« Reply #2 on: January 12, 2014, 08:41:01 AM »
my 2009 rmz450 runs a wider axle vs my rm smoker.  the lug castings do look the same.

i had a sleeve made so i can run the smoker front wheel on the rmz

Offline Bruce372

  • Pro
  • *****
  • Posts: 3371
    • View Profile
Re: rmz 250 forks on a rm250?
« Reply #3 on: January 12, 2014, 08:41:47 AM »
bigger end of the axle is the same diameter on both bikes

billyghog

  • Guest
Re: rmz 250 forks on a rm250?
« Reply #4 on: January 12, 2014, 10:17:08 AM »
The clamp diameters might be different. Measure the top and bottom to make sure they're the same on both bikes.

Offline knelson351

  • Novice
  • **
  • Posts: 191
    • View Profile
Re: rmz 250 forks on a rm250?
« Reply #5 on: January 15, 2014, 06:51:33 AM »
The axles for sure are different sizes. The 2 strokes (125 and 250) have the same size axle and the 4strokes (250/450) share the same size axle.